Overview
Most leaks we repair come from a handful of causes: a fitting that has worked loose, copper that has pitted through, a supply line past its life, a nail through pipe in a wall, or a joint stressed by high water pressure. The right repair depends on the pipe material on both sides and on why it failed.
We cut back to sound pipe, join it with the correct fittings for copper, PEX, CPVC or galvanized, and pressure test the system before closing anything up. We also check house pressure on every leak call, because pressure over 80 psi is one of the most common reasons the same house keeps springing leaks.
How we handle it
Stop the water
Shut off the branch or the main.
Repair to sound pipe
Matched material and the right transition fittings.
Test and check pressure
System tested and house pressure measured.
What it costs
An exposed fitting under a sink is the low end. Leaks inside walls or ceilings need an access opening, and yard or slab leaks need digging or cutting. Drywall and finish repairs are not included and are best done by a handyman.
Good to know
- Know how to shut off water to each fixture as well as the main.
- Replace rubber washing machine hoses with braided steel.
- Put a leak sensor under the water heater and kitchen sink.
Many homes around Leon Valley and the Medical Center area were plumbed in copper decades ago. Pinholes in old copper tend to come in clusters, so one leak is worth a closer look at the rest of the line.
Plumbing leak repair questions
Can you patch drywall too?
We handle the plumbing. Drywall and paint are best left to a handyman or contractor.
Will insurance cover my leak?
Many policies cover sudden water damage. We can document the repair for your adjuster.
What causes pinhole leaks?
Water chemistry, age and high pressure wear copper from the inside.
Do leaks always show up as stains?
No. Some leaks drain into the slab or soil and only show on the bill or meter.